![]() ![]() When the battery charge status changes, the converter will return to the automatic mode of operation to prevent damage to the battery. After the manual button is released the converter will stay in the selected mode. Continue to hold the button until the light blinks slowly indicating the converter is now in the Storage Mode. Continue to hold the button and the light will blink rapidly indicating the converter is in the Normal Mode. The indicator light will soon remain “ON” indicating Boost Mode. For manual operation, Press and Hold the button. WIZARD MODE BUTTON - The manual button has been provided to allow the operator to temporarily override the converter (not recommended) or to verify the converter is operating properly. In this mode the output voltage has been lowered to 13.2VDC, the RV battery is fully charged and the converter is maintaining the charge. STORAGE MODE – Indicated by green LED flashing every 6 - 8 seconds. In this mode the output voltage is 13.6VDC and the converter is safely completing the charge of the battery. ![]() When the battery has reached 90% of full charge, the green LED will flash 2 - 3 times per second. Plugs in to your Inteli-Power 9100 Series Converter/Charger making it an intelligent power control. NORMAL MODE – When the battery is between 50% and 90% charged, the green LED will flash once per second. This amazing microprocessor greatly extends battery life. The output voltage is 14.4VDC to rapidly recharge the battery up to 90% of full charge. BOOST MODE – Indicated by green LED remaining on. Below is also a link to the manual where you can find more information on this product. Here are all the charge modes for this Progressive Dynamics Converter/Charger. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |